Bison 7-830-0600 Bison Br. 6 Inch Two Jaw Universal Chuck

Bison 7-830-0600 Bison Br. 6 Inch Two Jaw Universal Chuck Reviews

Other Picture

Bison 7-830-0600 Bison Br. 6 Inch Two Jaw Universal Chuck Feature

• Number of Jaws: 2.000
• Diameter (Inch): 6
• Jaw Type: Two Piece Soft Top Reversible Jaws
• Body Material: Semi-Steel
• Thru Hole Size (Decimal Inch): 1.6500"

2 Jaw Plain Back Self-Centering Scroll Lathe Chucks Number of Jaws: 2.000 Diameter: 6 Jaw Type: Two Piece Soft Top Reversible Jaws Body Material: Semi-Steel Thru Hole Size: 1.65 In.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 18, 2011 09:17:04

3.5" x 17" lathe, chuck and B accessory package, metric

3.5" x 17" lathe, chuck and B accessory package, metric Reviews

Other Picture

3.5" x 17" lathe, chuck and B accessory package, metric Feature

• Size: Turns 3.5 diameter parts over the bed, 17 between centers
• Adjustable zero handwheels can be reset to zero at any timesaves input errors
• Includes additional accessories and 48-page manual
• One year warranty
• Handwheels calibrated in .01mm increments

Dovetailed machine slides with adjustable gibs for long-lasting accuracy, ground steel bed and cast base for rigidity, instrument quality finishes, laser engraved aluminum handwheels, precision rolled leadscrews, inch or metric calibrations available, powerful DC motor with electronic speed control, 70-2800 RPM range, two 20mm headstock bearings with adjustable preload, extra pulley position for high torque, rotating headstock for taper turning. Spindle has #1 Morse internal taper, ¾-16 external thread, .405 through hole. Includes faceplate, drive dog, tool post, ¼ right-hand HSS cutting tool, two dead centers, two chuck arbors and drawbolt, 4 hex adjustment keys and 2 spindle bars. Turn wood, plastic, brass, aluminum or steel (Stainless and Titanium with optional carbide tools) to tolerances of less than 1/1000.Made in USA. B Package adds 3.1 3-jaw chuck and 3/8 Jacobs tailstock drill chuck. Also includes steady rest, live center, cutoff tool/holder HSS cutting tool set, 5/32" T-driver, Hex T-driver, center drill set, Sherline Accessories Shop Guide book. Also includes steady rest, live center, cut-off tool and holder, 3 pc. HSS cutting tool set, hex t-driver, center drill set and Sherline Accessories Shop Guide book. Save .00 compared to buying all accessories separately.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 15, 2011 05:40:04

Collis Tool 85422 1 1/4 Od 5/8 Id Collis Bushing Type J

Collis Tool 85422 1 1/4 Od 5/8 Id Collis Bushing Type J Reviews

Other Picture

Collis Tool 85422 1 1/4 Od 5/8 Id Collis Bushing Type J Feature

• Package Quantity: (1) Piece
• Outside Diameter (Decimal Inch): 1.2500"
• Outside Diameter (Inch): 1-1/4
• Length Under Head (Inch): 2-1/8
• Length Under Head (Decimal Inch): 2.1250"

CNC Toolholder Bushings - Type "J" Outside Diameter: 1.2500 In., 1-1/4 Length Under Head: 2.1250 In., 2-1/8 Inside Diameter: 5/8 Head Thickness: 0.1870 In., 3/16

Visit Store Now !!

Detail Products

Detail Reviews

Jun 12, 2011 02:04:10

Buck Forkardt A10239 Screw F/A1144 Parts F/Independent Chck

Buck Forkardt A10239 Screw F/A1144 Parts F/Independent Chck Reviews

Other Picture

Buck Forkardt A10239 Screw F/A1144 Parts F/Independent Chck Feature

• Package Quantity: (1) Piece
• Fractional Chuck Size: 4
• Metric Chuck Size: 101.60
• Chuck Size Inch: 4.0
• Screw Size (Inch): 4

Jaws - Lathe & Mill Chucks Fractional Chuck Size: 4 Metric Chuck Size: 101.60 Chuck Size Inch: 4.0 Screw Size: 4, 101.60 mm Height: 3

Visit Store Now !!

Detail Products

Detail Reviews

Jun 08, 2011 22:59:04

Woodturners Calipers, 2 pc. Set

Woodturners Calipers, 2 pc. Set Reviews

Other Picture

Woodturners Calipers, 2 pc. Set Feature

• Nickel plated steel
• Double end design
• Ideal for bowl turners

These calipers are indispensable for measuring diameters and wall thicknesses of large bowls during turning. The special double end design transfers a measurement from one tip to the other tip, so thicknesses can be figured without removing the caliper from the work in progress. Made of nickel plated steel. Inside-Outside Calipers measure 6" from pivot to tips. Double-Ended Calipers measure 7" from pivot to tips.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 08, 2011 03:45:10

CNC linear controller w/ stepper motor

CNC linear controller w/ stepper motor Reviews

Other Picture

CNC linear controller w/ stepper motor Feature

• Attach to any Sherline CNC-ready axis, driven by programmable keypad
• Input commands at the control box to move appropriate lathe or mill slide
• Programmable from 1 inch/min to 25 inch/min feed rates
• Input dimensions to 3 and ½ decimal places (.0005")
• No metric version available at this time

The programmable controller is essentially a stepper motor driven power feed for any axis of your Sherline CNC-ready lathe or mill. The driver box contains a programmable chip that uses simple commands entered from its own keypad to control speed, direction and stopping points of your lathe or mill. Speed is programmable from 1 IPM to 25 IPM, and distance is programmable in .0005 increments. Backlash compensation is also programmable. Two or more units can be daisy-chained together for sequential operations. It can work with another 8800 controller or with the 8700 rotary table controller for operations like full automation of cutting gear teeth. Two programs of up to 40 steps with 4 parameters per step (speed, distance, direction and stop/wait for signal) are available. An LCD readout on the control box gives you current position and prompts you for programming commands. Included is a 120 VAC power supply. (NOTE: Available in inch version only, no metric or 240 VAC version available at this time.)

Visit Store Now !!

Detail Products

Detail Reviews

Jun 07, 2011 04:33:04

Techniks 48/3-4158 5/8" ANSI Clutch Tap Collet Size 3

Techniks 48/3-4158 5/8" ANSI Clutch Tap Collet Size 3 Reviews

Other Picture

Techniks 48/3-4158 5/8" ANSI Clutch Tap Collet Size 3 Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

5/8" ANSI Clutch Tap Collet, Size 3

Visit Store Now !!

Detail Products

Detail Reviews

Jun 06, 2011 10:30:10

Royal Products 44007 115 mm Spindle To A2-5 Chuck Adapter Plate

Royal Products 44007 115 mm Spindle To A2-5 Chuck Adapter Plate Reviews

Other Picture

Royal Products 44007 115 mm Spindle To A2-5 Chuck Adapter Plate Feature

• Mount an A2-5 chuck on a 115mm Spindle; 0.75" thick
• Made from high carbon alloy steel hardened to Rc 48-52
• High accuracy, 0.0003" TIR guaranteed
• Drive button and metric screws (for mounting plate to spindle) are included

Adapter plates offer the flexibility to mount collet chucks and 3-jaw chucks to a wider range of spindles. Mount a larger chuck on a smaller spindle for increased capacity. Mount a smaller chuck on a larger spindle for increased tool clearance and higher speeds. Metric screws included for mounting plate to spindle. Drive button is also included. Hardened and ground. Concentricity of 0.0002" TIR guaranteed.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 05, 2011 11:07:05

Global Cnc Industries 8819 1x5/16" Cnc Boring Bar Sleeve

Global Cnc Industries 8819 1x5/16" Cnc Boring Bar Sleeve Reviews

Other Picture

Global Cnc Industries 8819 1x5/16" Cnc Boring Bar Sleeve Feature

• Package Quantity: (1) Piece
• Maximum Cutting Tool Size: 0.3125
• Overall Length (Inch): 6
• Outside Diameter (Inch): 1
• Inside Diameter (Inch): 5/16

CNC Boring Bar Sleeves Maximum Cutting Tool Size: 0.3125 Overall Length: 6 Outside Diameter: 1 Inside Diameter: 5/16

Visit Store Now !!

Detail Products

Detail Reviews

Jun 04, 2011 20:53:05

Techniks A 500.90.3CT.402NW Large Finish Head-90 degree

Techniks A 500.90.3CT.402NW Large Finish Head-90 degree Reviews

Other Picture

Techniks A 500.90.3CT.402NW Large Finish Head-90 degree Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

Large Finish Head-90?

Visit Store Now !!

Detail Products

Detail Reviews

Jun 04, 2011 02:13:11

Techniks 08340-22.0 ER 40 Sealed Coolant Collet Size 22.0mm

Techniks 08340-22.0 ER 40 Sealed Coolant Collet Size 22.0mm Reviews

Other Picture

Techniks 08340-22.0 ER 40 Sealed Coolant Collet Size 22.0mm Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

ER40 Sealed Coolant, size 22.0mm

Visit Store Now !!

Detail Products

Detail Reviews

Jun 03, 2011 14:05:05

Spacer block kit

Spacer block kit Reviews

Other Picture

Spacer block kit Feature

• Raises headstock 1.25 to allow turning of larger parts on lathe
• Increases maximum size that can be turned to 6 over bed or 4-3/8 over table
• Includes 1.25 longer riser rocker tool post to accommodate increased center height

The spacer block kit allows parts of larger diameters to be turned on the lathe. By raising the headstock 1.25, parts up to 6 in diameter can be turned over the bed, or 4-3/8 over the table. Included are both the 1.25 riser block and a special riser rocker tool post that is also extended by 1.25. The riser block can also be used to extend the throat distance on a Sherline mill by an additional 1.25, as it is the same as the P/N 1297 headstock spacer block. Precision ground alignment key and attachment bolts are included.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 02, 2011 23:56:05

Techniks 04008-5/8 TG 75 Collet for Shank Size 5/8"

Techniks 04008-5/8 TG 75 Collet for Shank Size 5/8" Reviews

Other Picture

Techniks 04008-5/8 TG 75 Collet for Shank Size 5/8" Feature

• Reduced T. I. R. (tool runout)
• Increase in Holding Power
• Extended Tool Life with Fewer Tool Changes
• Reduction in Spindle Bearing Wear
• Each Techniks Tool is Individually Lab Certified for Accuracy and Balance

TG75 Collet, fits shank size 5/8"

Visit Store Now !!

Detail Products

Detail Reviews

Jun 02, 2011 03:02:05